Silicon Photonics: Can Optical Interconnects Solve AI's Data Movement Problem?

Why optical networking, co-packaged optics, and photonic chiplets are becoming critical to the economics of large-scale AI infrastructure

Updated: November 2026

Introduction: The Next AI Bottleneck Is Moving Data

Artificial intelligence infrastructure is usually discussed in terms of GPU performance, high-bandwidth memory, and semiconductor manufacturing.

These technologies determine how quickly an individual accelerator can process data.

However, modern AI systems increasingly rely on thousands of accelerators working together.

Training and serving large models requires information to move between processors, servers, network switches, and sometimes geographically separated data centers.

That creates a fundamental challenge.

Computing performance can increase faster than the infrastructure responsible for moving data.

When processors wait for information from other parts of the system, additional computing capacity may deliver diminishing returns.

The challenge is not simply to build faster chips.

It is to connect those chips efficiently.

Silicon photonics is attracting attention because it combines semiconductor manufacturing techniques with optical communication.

Instead of relying exclusively on electrical signals traveling through copper connections, optical systems transmit information using light.

Companies including NVIDIA, Broadcom, and Intel have demonstrated or introduced technologies that bring optical communication closer to the electronic chips responsible for computation and networking.

Yet optical interconnects are not a universal replacement for electrical connections.

Their value depends on distance, bandwidth, power consumption, manufacturing complexity, reliability, and total system cost.

This article examines where silicon photonics can improve AI infrastructure, where its limitations remain, and what commercial adoption will require.


1. Why AI Systems Need So Much Communication

An individual GPU performs calculations using data stored in registers, caches, and memory.

When AI workloads become too large for one accelerator, computation must be distributed across multiple devices.

Distributed training can involve exchanging gradients, model parameters, and intermediate results.

Large-scale inference can also require communication between processors when a model is partitioned across devices.

The communication requirements vary substantially by workload and system architecture.

For example, a training cluster using data parallelism has different communication patterns from an inference system using tensor parallelism.

However, both can experience performance limitations when data movement is insufficiently fast or efficient.

Three Levels of AI Data Movement

It is useful to separate the problem into three layers.

LayerTypical connectionMain challenge
Inside an acceleratorCompute units, cache, and HBMMemory bandwidth and latency
Between accelerators and serversHigh-speed electrical and optical linksNetwork bandwidth, latency, and power
Between data centersOptical transport networksCapacity, distance, reliability, and cost

This distinction is essential.

HBM4 and advanced packaging address important aspects of memory access and chip integration.

Silicon photonics primarily targets optical communication and increasingly closer integration of optical I/O with electronic systems.

The technologies are complementary rather than direct substitutes.

2. What Is Silicon Photonics?

Silicon photonics uses semiconductor fabrication techniques to build optical components on silicon-based platforms.

These components can guide, modulate, route, and detect light.

A photonic integrated circuit may include optical waveguides, modulators, photodetectors, and other structures.

The objective is to integrate functions that would otherwise require larger collections of discrete optical components.

A Simplified Data Transmission Process

Consider an electrical signal generated by a networking chip.

A typical optical communication system performs several steps:

  1. Electronic circuitry produces data signals.

  2. An optical transmitter encodes the information onto light.

  3. The light travels through an optical fiber.

  4. A receiver converts the optical signal back into electrical information.

  5. Electronic circuitry processes the received data.

The exact architecture varies.

Some systems use integrated lasers; others use external light sources.

Some optical links use direct detection, while others employ coherent optical techniques.

The key advantage is that optical fiber can carry high-bandwidth signals over distances that become challenging for high-speed electrical connections.

However, conversion between electrical and optical domains consumes power and adds cost.

This means optical communication is not automatically superior at every distance.

3. Why Copper Connections Face Increasing Challenges

Copper-based electrical links remain essential to computing systems.

They are well understood, widely manufactured, and effective over short distances.

However, as data rates increase, electrical transmission becomes more difficult.

Important challenges include:

  • Signal attenuation.

  • Frequency-dependent losses.

  • Crosstalk between neighboring channels.

  • Signal integrity requirements.

  • Equalization and retiming power.

  • Cable and connector complexity.

Engineers can compensate for some of these limitations through improved materials, circuit design, and signal processing.

But those improvements can increase system power and cost.

At sufficiently demanding bandwidth and distance combinations, optical links become attractive.

The Important Qualification

The comparison is not simply copper versus light.

A complete system includes serializers, drivers, receivers, digital signal processing, connectors, packaging, and power delivery.

An optical solution may reduce transmission losses while introducing optical conversion and thermal-management requirements.

Therefore, the correct engineering comparison is:

Total energy, latency, cost, and reliability for a specified bandwidth and distance.


4. Pluggable Optical Transceivers: The Established Approach

Optical communication is already widely used in data centers.

A conventional network switch can connect to optical fiber through removable transceiver modules.

These modules convert between electrical signals from the switch and optical signals traveling through fiber.

This architecture has important advantages.

Pluggable modules can be replaced independently.

Network operators can select different optical modules for different distances.

Maintenance and interoperability are supported by established industry practices.

However, high-speed electrical signals must still travel from the switch chip across the circuit board to the optical module.

As aggregate switch bandwidth increases, this electrical path can become more demanding.

The industry is therefore exploring ways to reduce the distance between electronic switching silicon and optical communication components.

That leads to co-packaged optics.

5. What Is Co-Packaged Optics?

Co-packaged optics, or CPO, places optical engines close to a networking ASIC within a shared package or closely integrated assembly.

The objective is to shorten high-speed electrical connections before the signals enter the optical domain.

A simplified comparison illustrates the difference.

Conventional Pluggable Architecture

Switch ASIC → High-speed electrical board traces → Pluggable optical module → Fiber

Co-Packaged Optics Architecture

Switch ASIC → Short electrical connection → Co-packaged optical engine → Fiber

The shorter electrical path can reduce some signal losses and power requirements.

It can also support higher optical I/O density.

However, bringing optical components closer to powerful electronic chips introduces manufacturing and operational challenges.

These include thermal sensitivity, assembly yield, optical coupling, serviceability, and testing.

CPO is therefore both a semiconductor packaging problem and an optical engineering problem.


6. NVIDIA's Approach: Optical Networking for AI Factories

NVIDIA announced its Spectrum-X and Quantum-X photonics networking platforms in March 2025.

The company positioned these systems as infrastructure for connecting large numbers of AI accelerators.

Its 2026 technical documentation describes Spectrum-X Ethernet Photonics as a co-packaged optical switching architecture designed for large-scale AI systems.

NVIDIA reports that its architecture can reduce power consumption per 1.6 Tb/s port by a factor of five compared with the pluggable interconnect configuration used in its comparison.

It also reports improvements in network resilience and sustained application operation.

These are vendor-reported results for specified architectures.

They should not be interpreted as a universal fivefold reduction in total data center electricity consumption.

Why the Distinction Matters

Network interface power is only one component of total AI infrastructure energy use.

A data center also consumes electricity through accelerators, CPUs, memory, storage, cooling, and power distribution.

Reducing optical interconnect power can be valuable without reducing every other source of electricity demand.

The meaningful system-level question is how much total energy and operational cost can be saved for a particular workload.

NVIDIA's approach also illustrates how CPO depends on an ecosystem of specialized suppliers.

The company has described collaboration involving TSMC, optical component manufacturers, fiber suppliers, and packaging partners.

Commercial adoption therefore requires coordinated progress across multiple industries.

7. Broadcom's Approach: Bringing CPO Into High-Capacity Switches

Broadcom has also been a prominent developer of co-packaged optical switching systems.

In March 2024, the company announced delivery of its Bailly 51.2 Tb/s CPO Ethernet switch platform.

The system integrated silicon-photonics-based optical engines with a high-capacity switch ASIC.

Broadcom reported a 70% reduction in optical interconnect power relative to its stated pluggable transceiver comparison.

In October 2025, Broadcom announced that it was shipping Tomahawk 6 Davisson, a 102.4 Tb/s CPO Ethernet switch.

This represented a further increase in announced switching capacity.

What Does 102.4 Tb/s Actually Mean?

A switch rated at 102.4 terabits per second has an aggregate switching capacity of:

102.4 trillion bits per second

Converting bits into bytes:

102.4 ÷ 8 = 12.8 terabytes per second

This is an aggregate bandwidth conversion.

It does not mean that one GPU can access 12.8 TB/s of additional HBM bandwidth.

It also does not guarantee that an application will achieve that data-transfer rate.

Real performance depends on network topology, protocol overhead, traffic patterns, congestion, and endpoint capabilities.

The distinction between theoretical aggregate capacity and application-level throughput is essential.

8. Intel's Optical I/O Chiplet: Moving Light Closer to Compute

Intel has explored a related but distinct application of silicon photonics.

In June 2024, Intel announced a demonstration of a fully integrated optical compute interconnect chiplet co-packaged with an Intel CPU and transmitting live data.

The demonstration showed the potential to integrate optical I/O directly into compute-oriented packages.

This is different from placing optical engines alongside a network switch ASIC.

The long-term objective is to make optical communication available closer to processors and other computing components.

Such architectures could become relevant as future systems require greater bandwidth between compute packages.

However, a laboratory demonstration does not establish mass-market adoption.

Commercial viability would require further progress in cost, manufacturing yield, power efficiency, integration, and long-term reliability.

Intel's work is therefore best understood as evidence of technological feasibility rather than proof that optical I/O will replace electrical interfaces throughout computing systems.


9. A Comparison of Three Approaches

TechnologyPrimary purposeMain advantageMain challenge
Pluggable optical transceiversFiber links between network devicesReplaceability and deployment flexibilityHigh-speed electrical path to module
Co-packaged opticsIntegrate optical engines near switch siliconReduced electrical reach and higher integration densityPackaging, thermal design, and serviceability
Optical compute I/O chipletsBring optical links closer to compute packagesPotentially scalable package-level optical communicationManufacturing maturity and ecosystem integration

These approaches should not be viewed as three consecutive generations in which one automatically replaces the previous option.

They may coexist.

Pluggable optics may remain preferable in applications where flexibility and field replacement are especially important.

CPO may be attractive in high-bandwidth switching systems where electrical I/O power becomes costly.

Optical compute I/O may become relevant for future processor interconnection architectures.

The preferred solution depends on system requirements.

10. The Power Efficiency Question

One of the strongest arguments for silicon photonics is its potential to reduce communication energy.

However, power claims need careful interpretation.

A technology can reduce the energy required for a particular link while leaving overall infrastructure energy consumption largely unchanged.

The impact depends on how much power the relevant links consume and how extensively the technology is deployed.

Illustrative Scenario

Assume a hypothetical AI data center contains networking equipment with a total electrical demand of 20 MW.

Suppose 30% of that demand is associated with a category of optical interconnect equipment.

That portion consumes:

20 MW × 30% = 6 MW

Now assume a new optical architecture reduces the power of that category by 50%.

The resulting reduction is:

6 MW × 50% = 3 MW

If the savings are sustained continuously for one year:

3 MW × 8,760 hours = 26,280 MWh

That equals:

26.28 GWh per year

At a hypothetical electricity price of $0.10 per kWh, the direct annual electricity saving would be approximately:

$2.63 million

These assumptions are illustrative.

They are not NVIDIA, Broadcom, or Intel deployment measurements.

The calculation also excludes changes in cooling demand, equipment costs, maintenance, and network utilization.

Why System Boundaries Matter

A claim of 50% lower optical engine power is not the same as 50% lower switch power.

Similarly, 50% lower switch power is not equivalent to 50% lower data center power.

Reliable analysis must identify the exact component or system being compared.


11. Bandwidth Density: More Data Through Limited Space

Data centers have physical constraints.

Switches must fit inside racks.

Electrical and optical connections must fit within equipment panels and packages.

High-speed links require space for cables, connectors, cooling, and maintenance access.

As network capacity increases, bandwidth density becomes an important design consideration.

CPO can potentially increase optical connectivity density by bringing optical engines closer to switching silicon.

However, density improvements must be balanced against serviceability and thermal constraints.

A tightly integrated optical package may be more difficult to repair than a removable transceiver.

The economic value of higher density therefore depends on reliability, replacement procedures, and total ownership costs.

12. Why Thermal Management Is a Serious Challenge

Electronic switching chips can generate substantial heat.

Optical components may be sensitive to temperature changes.

For example, the optical behavior of certain silicon-photonic devices depends on precise wavelength control.

Thermal variation can affect device performance and may require compensation.

Integrating optical engines near high-power electronic chips therefore introduces a difficult engineering trade-off.

The architecture benefits from shorter electrical paths, but the optical devices must operate in a demanding thermal environment.

NVIDIA has described collaboration with TSMC and other suppliers to address photonic manufacturing and thermal challenges.

This demonstrates that the future of CPO depends on more than designing a fast optical modulator.

It requires a manufacturable package that can maintain performance under real operating conditions.

13. Manufacturing Yield and Repairability

Semiconductor manufacturing economics depend heavily on yield.

If a complex package contains multiple electronic and optical components, the failure of one component may affect the value of the assembled system.

This creates incentives to test optical engines before final assembly.

It also encourages modularity where practical.

However, modular packaging may increase mechanical complexity or introduce additional interfaces.

The best design balances:

  • Manufacturing yield.

  • Component testing.

  • Assembly cost.

  • Thermal performance.

  • Optical alignment.

  • Field replacement.

  • Long-term reliability.

These factors can determine whether a technically impressive CPO architecture is commercially attractive.

A lower-power design may not provide lower total cost of ownership if it is expensive to manufacture or maintain.


14. Why Optical Interconnects Do Not Automatically Reduce Latency

Optical communication is often described as faster because light travels quickly.

But communication latency involves more than signal propagation.

Total latency may include:

  • Serialization and deserialization.

  • Electrical-to-optical conversion.

  • Optical-to-electrical conversion.

  • Forward error correction.

  • Switching and routing.

  • Buffering and congestion.

  • Physical propagation time.

For very short distances, conversion and processing overhead may be significant relative to propagation delay.

For longer links, optical fiber can provide major advantages in bandwidth and signal integrity.

Therefore, silicon photonics should not be assumed to deliver lower end-to-end latency in every application.

Latency must be measured for the complete system and workload.

15. Where Optical Links Make the Most Sense

Different interconnect distances create different engineering requirements.

Connection distanceCommon considerationsLikely technology mix
Within a chip or packageExtremely short reach, high density, latencyPrimarily electrical today; optical research continues
Between nearby components or boardsHigh bandwidth and tight power budgetsElectrical links and emerging optical approaches
Between racks or network switchesBandwidth, distance, cabling, energyElectrical and optical solutions depending on reach
Between data centersLong distance, high capacity, optical transportFiber-based optical networking

These categories are qualitative.

The boundaries between them vary by data rate, cable type, architecture, and equipment generation.

The key point is that optical technology becomes more compelling in certain bandwidth-distance regimes.

It does not automatically displace every short electrical connection.


16. The Role of Optical Networking Standards

Large-scale infrastructure depends on interoperability.

Data center operators need equipment from different suppliers to work together.

Standards help define electrical, optical, and management interfaces.

The Optical Internetworking Forum (OIF) plays an important role in this process.

In September 2026, OIF published an implementation agreement for 1600ZR coherent interfaces.

The specification defines an interoperable 1.6 Tb/s coherent optical line interface for amplified, point-to-point DWDM links up to 120 kilometers.

This development is important for high-capacity data center interconnects.

However, it addresses a different application from co-packaged optics inside an AI cluster.

Why 1600ZR Is Not the Same as CPO

CPO focuses on bringing optical communication closer to switching or computing silicon.

1600ZR defines a coherent optical interface for transporting data over longer distances.

Both contribute to AI infrastructure connectivity, but they solve different problems.

Confusing these categories can lead to misleading claims about bandwidth, power, or deployment readiness.

17. The Supply Chain Behind Silicon Photonics

A commercial optical interconnect system requires more than one advanced chip.

The ecosystem may include:

  • Photonic integrated circuit designers.

  • Semiconductor foundries.

  • Electronic ASIC suppliers.

  • Laser manufacturers.

  • Optical fiber and connector suppliers.

  • Advanced packaging providers.

  • Testing and measurement companies.

  • Network equipment manufacturers.

This creates new opportunities and dependencies across the semiconductor and optical communications industries.

A company with strong GPU technology may still depend on partners for photonic devices, packaging, and fiber infrastructure.

Similarly, a photonics company may need advanced electronic integration to deliver a competitive system.

The competitive landscape is therefore likely to involve partnerships as well as direct competition.

18. The Economic Case: When Does CPO Become Attractive?

A data center operator evaluating CPO should compare total system costs.

Potential benefits include lower electrical I/O power, improved bandwidth density, and reduced high-speed electrical signal-conditioning requirements.

Potential costs include more complex packaging, specialized testing, service procedures, and integration.

Illustrative Decision Framework

Economic variableQuestions to ask
Initial equipment costHow much more or less does the integrated system cost?
Power consumptionWhat is the measured saving at the same workload?
Cooling requirementsDoes reduced power offset new thermal-management complexity?
ReliabilityHow often do components fail, and what is the consequence?
MaintenanceCan failed optical components be replaced economically?
Network performanceDoes the architecture improve useful application throughput?
Deployment scaleAre manufacturing and supply chains ready for volume production?

A product may be technically superior but economically unattractive if the additional investment cannot be recovered.

Conversely, relatively modest energy savings may become significant across thousands of high-capacity network ports.

The answer depends on the operating environment.


19. Five Indicators to Monitor Through 2030

1. Energy per Transmitted Bit

This metric helps compare communication efficiency under defined conditions.

The system boundary must be explicit.

2. Optical Bandwidth Density

How much aggregate bandwidth can be delivered within a given package, panel, or system footprint?

3. Manufacturing Yield

Can optical and electronic components be integrated reliably at commercial volumes?

4. Field Serviceability

How easily can operators diagnose and replace failed optical components?

5. Application-Level Performance

Do improvements in the network translate into higher useful AI training or inference throughput?

These indicators are more informative than headline bandwidth figures alone.

They help distinguish laboratory achievements from infrastructure technologies that can be deployed economically.

20. Will Optical Interconnects Replace Copper?

The most plausible near-term outcome is coexistence.

Electrical interconnects will continue to serve applications where their short-distance performance, cost, and integration advantages remain strong.

Optical interconnects will expand where bandwidth, distance, and power requirements justify them.

CPO may gain adoption in high-capacity network switches.

Optical compute I/O could become more important as processor-level communication requirements increase.

However, the speed of adoption will depend on manufacturing maturity, reliability, interoperability, and economics.

It is therefore more accurate to describe silicon photonics as an expanding part of the computing interconnect ecosystem than as a complete replacement for copper.

Conclusion: AI Performance Depends on More Than Faster Processors

The AI industry has made enormous progress in computing hardware.

GPUs have become more powerful.

High-bandwidth memory has improved data access.

Advanced packaging has enabled increasingly complex semiconductor systems.

But large-scale AI also depends on moving information efficiently between those systems.

Silicon photonics addresses part of that challenge by integrating optical communication more closely with semiconductor technology.

NVIDIA and Broadcom are advancing co-packaged optical switching.

Intel has demonstrated optical I/O integrated with compute packaging.

OIF is developing interoperability specifications for increasingly high-capacity optical transport.

These developments show that optical communication is becoming a strategic component of AI infrastructure.

Yet the commercial question remains broader than raw bandwidth.

The technologies that matter most will be those that deliver useful data movement at acceptable energy, cost, latency, reliability, and manufacturing complexity.

The next stage of AI infrastructure competition will not be decided by compute performance alone.

It will also depend on how effectively the industry connects its computing resources.


References and Further Reading

  1. NVIDIA — Scaling Power-Efficient AI Factories with NVIDIA Spectrum-X Ethernet Photonics (January 6, 2026). CPO architecture, power efficiency, and AI networking design.
    https://developer.nvidia.com/blog/scaling-power-efficient-ai-factories-with-nvidia-spectrum-x-ethernet-photonics

  2. NVIDIA — NVIDIA Announces Spectrum-X Photonics (March 18, 2025). Official announcement of silicon-photonics networking platforms.
    https://nvidianews.nvidia.com/news/nvidia-spectrum-x-co-packaged-optics-networking-switches-ai-factories

  3. Broadcom — Tomahawk 6 Davisson 102.4-Tbps CPO Ethernet Switch (October 8, 2025). Official product and shipment announcement.
    https://www.broadcom.com/company/news/product-releases/63626

  4. Broadcom — Bailly 51.2-Tbps Co-Packaged Optics Platform (March 14, 2024). CPO system design and vendor-reported optical interconnect power improvements.
    https://www.broadcom.com/company/news/product-releases/61946

  5. Intel — Intel Demonstrates First Fully Integrated Optical I/O Chiplet (June 26, 2024). Optical compute interconnect demonstration.
    https://newsroom.intel.com/artificial-intelligence/intel-unveils-first-integrated-optical-io-chiplet

  6. Intel — Silicon Photonics Technology. Overview of integrated optical communication and optical compute interconnects.
    https://www.intel.com/content/www/us/en/products/details/network-io/silicon-photonics.html

  7. OIF — OIF Releases 1600ZR Coherent Interface Implementation Agreement (September 9, 2026). Standardization of 1.6 Tb/s coherent optical transport.
    https://www.oiforum.com/oif-releases-critical-1600zr-coherent-interface-ia-doubling-capacity-per-wavelength-for-data-center-interconnects/

  8. NVIDIA — How Industry Collaboration Fosters NVIDIA Co-Packaged Optics (August 26, 2025). Optical engines, thermal considerations, packaging, and supply-chain collaboration.
    https://developer.nvidia.com/blog/how-industry-collaboration-fosters-nvidia-co-packaged-optics/

Methodology note: The switch-capacity conversion and illustrative electricity-savings scenario are original calculations based on stated assumptions. Vendor performance claims are identified as such. Demonstrations, product shipments, technical specifications, and deployed customer outcomes are treated as distinct forms of evidence.

댓글

이 블로그의 인기 게시물

Energy: Aramco vs. ExxonMobil

About the Author: Drytree

Leading the AI Era: NVIDIA’s Journey of Innovation and Transformation